Ready to Order?

Priser Pris: 1424.00 904,00 kr Pris inkl moms Köp Lägg i Varukorgen Lagerstatus: Leveranstiden: 2-5 Dagar Garanti: Officiella garanti

officiella återförsäljare

Specifikationer Mode Button - Selects the display mode (Normal or Strobe) for the Tuning LED Array. The modes are labeled below the last two LEDs of the Tuning LED Array. Input - Connect your instrument here. This jack enables battery power to the pedal when connected. To prolong battery life, disconnect the cable from the Input jack when not in use. If the optional Harman PS200R power supply is used, cables can remain connected. Foot Switch Release Pins - These two pins are spring loaded hinges that hold the Foot Switch in place. See page 13 for information on accessing and changing the battery. Foot Switch - Turns the Tuner on and off. Thru Output - Connect this output to the input of your amp or the input of another pedal if you want the output signal from your instrument to be audible when the tuner is enabled. Mute Output - Connect this output to the input of your amp or the input of another pedal if you want the output signal from your instrument to be muted when the tuner is enabled. Tuning Button - Selects the different tuning references. The tuning references are labeled below the first 9 LEDs of the Tuning LED Array. DC Adapter Jack - Connect (an optional) Harman PS200R power supply to this jack. Use the proper supply for your area’s mains line voltage. LED Indicator - Lights when the effect is turned on. When battery power is low (approximately 15 minutes before it dies), the Indicator LED begins to dim giving you advanced warning that very shortly you will need to replace the battery. Note Display - Displays the note being tuned. The decimal point in the lower right corner of the display will light to indicate the sharp of the note is played (i.e. G. = G#). Tuning LED Array - These eleven LEDs are used for displaying whether the note being tuned is sharp or flat. They are also used to indicate tuning references and tuning LED array modes. Controls - Mode Button, Tuning Button, On/Off Pedal Jacks - Input, Mute, Thru Input Impedance - >1 MÙ - tuner on Input Impedance - true hardwire bypass - tuner off Power Supply - 9V Alkaline Dry Battery or Harman PS200R 9V DC power supply Current Draw - 40 mA (typical at 9V DC) Power Consumption - 350 mW (typical w/optional PS200R power supply) Dimensions - 5.25”(L) x 3.5”(W) x 2.15”(H) Weight - 1.3 lbs. Optional Power Supply: PS200R-100 (100V~ 50/60Hz) PS200R-120 (120V~ 60Hz) PS200R-230 (230V~ 50Hz) PS200R-240 (240V~ 50Hz)

HardWire HT-2 Professional Chromatic Tuner Pedaal

Audio, Video & Sounds

Related and Similar to HT-2